Unsolved
This post is more than 5 years old
2 Intern
•
165 Posts
0
3312
Isilon with SRM Suite
Hi,
Has any body used SRM monitoring suite with Isilon. I have issues discovering the Isilon clusters. Isilon - OneFS 7.0.2.4 and SRM 3.0 SP1.
Thanks,
Damal
Rdamal
2 Intern
2 Intern
•
165 Posts
0
March 26th, 2014 15:00
Tried both ways using specific node IP address and smart connect IP address as well.
As per the SNMP settings, below is the screenshot and SNMP is enabled on the cluster with SNMP read-only being used
Any other suggestions ?
gawanb
21 Posts
0
March 26th, 2014 15:00
Make sure you are using the actual node IP address of each node of the cluster, and not the cluster IP or smart connect IP.
Also make sure to use the right SNMP settings as seen in the OneFS UI.
- Brijesh
gawanb
21 Posts
0
March 26th, 2014 16:00
So just to confirm. If you login to OneFS, and see the cluster status like below, make sure you use one of the IPs
And if you go to Cluster Management > General Settings > SNMP Monioring, make sure the setting is what you use in device discovery. If all is good, try increasing timeout. Else open an SR and we can look.
gawanb
21 Posts
0
March 26th, 2014 17:00
Whats the SR#? Let me check.
- Brijesh
Rdamal
2 Intern
2 Intern
•
165 Posts
0
March 26th, 2014 17:00
Its been configured just the way you said - using a specific IP address of node and still the same. Increased the timeout value and it dint make much difference.
SR is opened and waiting for resolution. Just trying to see how its going in other environments.
Is SRM compatible with Isilon LACP mode?
Rdamal
2 Intern
2 Intern
•
165 Posts
0
March 26th, 2014 19:00
Sorry that i have to say i can't reveal the SR
gawanb
21 Posts
1
March 26th, 2014 20:00
I forgot to mention that I work for SRM Suite support at EMC. If you are not comfortable mentioning the SR details here, you can email me at brijesh.gawande@emc.com. I can escalate this to engineering if need be.
Good luck.
- Brijesh