This post is more than 5 years old
1 Rookie
•
9 Posts
0
4260
Unity VSA installation Problem
Hello all
Please help me to check my Unity VSA installation.
Today I install Unity VSA by ESXi 6 after finish I login to my Unity VSA by username/password: service/service.
Then I execute command: svc_initial_config -4 "192.168.1.77 255.255.255.0 192.168.1.254"
It show error as below:
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 31st, 2016 13:00
Hi Panha_nhen,
You have run the command correctly but the SP cannot be configured as it is in Service Mode as the output indicates. You could run svc_diag to investigate further. If you are still having issues, please raise the issue with the Support form.
Thanks
KEHutchinson
2 Intern
2 Intern
•
633 Posts
0
September 1st, 2016 09:00
You can find the Unity Support Forum here: Unity
3wW48xWOai12161
11 Posts
0
October 11th, 2016 05:00
Hi,
I had the same error.
Please check the VM config of Unity VSA.
I have decrease the Ram from 12 GB to 18 GB and got this error.
Please deploy agin the OVA and DON'T make any change!!!
https://www.emc.com/collateral/white-papers/h15092-emc-unity-unity-vsa.pdf
best regards.