This post is more than 5 years old
155 Posts
0
606
DMX SRDF config
Dears,
sub : SRDF config on DMX3
I have added new devices to source and target .. and then I have created the pair with the command
symrdf createpair -f c:\rdfout.txt -type r1 -sid xxx -rdfg xxx -invalidate r2
and then added device to the existing group
symld -sid xxx -g AAA add dev XXX
symrdf -g dg_rdfg100 set mode acp_disk DEV70
and then I have change the mode to synchronous
symrdf -g XXX set mode sync
But, the newly created devices not getting synched and still in suspended mode
DEVxxx 03EF RW 0 1657260 NR 02C7 WD 0 0 C.D- Suspended
DEVbbb 03F0 RW 0 1657260 NR 0195 WD 0 0 C.D- Suspended
please kindly guide me to resolve this
cheers
M39
11 Posts
0
April 19th, 2011 22:00
Hello,
Best way to do it is…after created RDF relationship,
You would have issues following command….
symrdf -f c:\rdfout.txt -type r1 –sid XXX –rdfg XX establish
After SYNC Completion… issues Split or Suspend
Then add NEW RDF Devices into respective SYMDG…
Thanks,
wishtobeMrEMC
155 Posts
0
April 20th, 2011 01:00
Thanks .. for new config, i will do so . but how to rectify this issue now? i need these to be synched
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 20th, 2011 03:00
symrdf -g establish DEVXXX
wishtobeMrEMC
155 Posts
0
April 20th, 2011 03:00
Dynamox, you are THE man . thanks .. it works