Unsolved
This post is more than 5 years old
9 Posts
0
786
Deleting device on Symm 8530
Hi All,
Why the below command is failing:
# symconfigure -sid xxx -cmd "delete dev 002B;" comm -nop
A Configuration Change operation is in progress. Please wait...
Establishing a configuration change session...............Established.
Error occurred while Defining change number 1:
The requested feature is not supported for this Enginuity or SYMAPI version
Device 002B generated the failure
Terminating the configuration change session..............Done.
The configuration change session has failed.
===============================
Further:
002B Not Visible ???:? 16B:C0 2-Way Mir N/Grp'd RW 5156
===============================
Is it something to do with the SYMM Erase License or anything else. Am using SYMCLI 7.5.
{8530 could be very old but am giving a try}
Regards
Taz~
Zikas
278 Posts
0
February 16th, 2013 04:00
Hi Mohammed,have you tried to execute the command with the -f (filename) and not the cmd option and you had the same result?
Zikas
278 Posts
0
February 16th, 2013 04:00
Have you checked the symapi.log file, what exactly is the error message?
Imtiaz_Uddin_Mo
9 Posts
0
February 16th, 2013 04:00
I used -f (file name) but throws the same error. I will check the log file. But thought its just a delete command and the device has no associations.
Tandok
34 Posts
0
February 16th, 2013 05:00
Please get a symdev show output of the device...Also please provide the enginuity code of the array
MelbSteve
38 Posts
0
February 17th, 2013 13:00
Hi Taz,
For this system there are strict rules for deleting volumes one of which it is an offline change.
The message you receive says "not supported for this Enginuity".