Unsolved
This post is more than 5 years old
14 Posts
0
340
SRDF_AR
Need to decomm symm that is using srdf_ar to another dmx2000.I will be migrating the source to a vmax.Can I configure srdf from vmax to the target DMX2000?
Unsolved
This post is more than 5 years old
14 Posts
0
340
Need to decomm symm that is using srdf_ar to another dmx2000.I will be migrating the source to a vmax.Can I configure srdf from vmax to the target DMX2000?
Top
Booyah2
184 Posts
0
June 4th, 2010 08:00
Required Enginuity Pack at 5671.81.78 / Registered build 5671_081/0002.
Required Enginuity Pack at 5671.80.77 / Registered build 5671_080/0033 / 5671_077/5005.
Note 05/18/2010: Fixes 47659 & 50692 are also required for CKD or Mixed systems. Epacks are currently being prepared at 5671.80.77 and 5671.81.78.
If you have a CKD or Mixed system SRDF to a V-Max, please request an epack that contains these fixes. Solution will be updated when new Registered Builds are available. The VMAX should be running 5874.229.182. Refer to emc240610
Hello Magz,
If your DMX2000 is running 5671 code, then it is supported as outlined above.
A full support matrix can be found in Solutions article emc211857
http://knowledgebase.emc.com/emcice/login.do?sType=ax1990&sName=1204&id=emc211857