Unsolved
This post is more than 5 years old
165 Posts
0
2958
October 6th, 2010 16:00
Set Dynamic SRDF between DMX 3000 and DMX 4 for A lun
Hi
Let me explain my situation:
I have two DMX boxes one of them is a DMX 3000 and the Second one a DMX 4, i need to replicate one Lun from the DMX 3000 to DMX 4, the Lun on the DMX 3000 is a meta head with 16 members and its configuracion is as follows
| Device Configuration : RAID-S (7+1) (Meta Head, |
--> 1009 8714 - - N/A - - N/A
100A 8714 - - N/A - - N/A
100C 8714 - - N/A - - N/A
100B 8714 - - N/A - - N/A
100D 8714 - - N/A - - N/A
100E 8714 - - N/A - - N/A
100F 8714 - - N/A - - N/A
1010 8714 - - N/A - - N/A
1011 8714 - - N/A - - N/A
1012 8714 - - N/A - - N/A
1013 8714 - - N/A - - N/A
1014 8714 - - N/A - - N/A
1015 8714 - - N/A - - N/A
1016 8714 - - N/A - - N/A
1017 8714 - - N/A - - N/A
1018 8714 - - N/A - - N/A
And the target lun on the DMX 4 is:
03C5 es a Meta Head with 16 Members
i want to replicate the Lun 1009 to 03C5, dont worry about the conections I have all conections and the Link is ready between boxes.
The problem Here is:
The lun 1009 is a production Lun, do i need to set the RDF1 to the Lun? wont it afect it? the third thing is if you see the members the sequence is wrong
1009 8714 - - N/A - - N/A
100A 8714 - - N/A - - N/A
100C 8714 - - N/A - - N/A
100B 8714 - - N/A - - N/A
100D 8714 - - N/A - - N/A
if you see there are luns like 100A and the next is 100C and so on.
I dont know how the customer created this meta by using no sequential meta members.
Please could you tell me how can i replicate this lun from the box DMX 3000 to DMX 4 by using Solutions Enabler to a Sequential Lun on the DMX 4 Box
Please tell me the steps.
Best regards