This post is more than 5 years old
29 Posts
0
7831
powerpath display dev=all showing one of the path is "unlic"
Hi all,
powermt display dev=all is showing one of the path is unlicenced as shown below and "emcpreg -list showing unable to open licence key file."
how to licence the second path and how to change policy from BasicFailover to SO.?
powermt display dev=all
Pseudo name=emcpower2a
Symmetrix ID=000290102002
Logical device ID=1407
state=alive; policy=BasicFailover; priority=0; queued-IOs=0;
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3072 pci@0,0/pci8086,340a@3/pci111d,806c@0/pci111d,806c@2/pci1077,172@0/fp@0,0 c2t5006048452A6BC86d33s0 FA 7aA active alive 0 0
3073 pci@0,0/pci8086,340c@5/pci111d,806c@0/pci111d,806c@2/pci1077,172@0/fp@0,0 c4t5006048452A6BC89d31s0 FA 10aA unlic alive 0 0
#emcpreg -list
unable to open license key file: No such file or directory
Thanks in Advance.
Conor
341 Posts
0
February 28th, 2013 03:00
Can you run the following command and add your license key when it prompts you:
emcpreg-install
Conor
341 Posts
0
February 28th, 2013 02:00
Can you run the following command and paste the output?
#powermt check_registration
atyam_storage
29 Posts
0
February 28th, 2013 03:00
Hi Conor,
it showing the below output
# powermt check_registration
There are no license keys now registered.
Vipin VK
812 Posts
1
February 28th, 2013 05:00
Powerpath if unlicensed will work with 'BasicFailover' policy which can handle only a single HBA. In your case powerpath is unlicensed, and that's the reason for the kind of output you are receiving.
You may find similar threads by searching in ECN as the one below,
https://community.emc.com/message/472252#472252