Unsolved
This post is more than 5 years old
6 Posts
0
13853
DELL MUMC - no nodes
Hi,
I`m using a Dell UPS Rack 1920W HV an a Dell R420 virtualizytion server with MS Server 2012 with hyper-v.
I installed the Dell Multi-UPS Management Console on one PC. The node list now is only showing the UPS an the PC, the software is installed on. How do I get the hyper-v server in the node list? Automatic discover doesn`t find any hosts. Do I have to open special firewall ports on the nodes?
THX for help!
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
February 11th, 2014 08:00
Hoeb,
You would also need to use ULNM (UPS Local Node Mgr) to do that. If you follow this link it will explain the steps for configuring, discovering and monitoring - ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_rack_infrastructure/dell-line-interactive-tower-ups-500t_Reference%20Guide4_en-us.pdf
Let me know if this helps.
HOEB
6 Posts
0
February 12th, 2014 01:00
Hi,
thx for your help, ths brought me one step further.
So just for my understanding:
- on the nodes, I want to shut down by the USP, in case of a powerloss, I have to install the ULNM software?!
just for my szenario:
as written, I have one USP with one R420 virtualization server (MS hyper-v) connected. In case of powerloss, the VMs on the server should shut down an finally the virtualization host.
so do I have to install the ULNM in every VM? Or just on the hyper-v host?
And where do I have to install the MUMC in this case? On an extra machine?
so many questions... ;)
HOEB
6 Posts
0
February 25th, 2014 01:00
no more hints for me?! :emotion-9: