Unsolved
This post is more than 5 years old
2 Posts
0
5478
DELL PowerEdge R710 IDRAC6 TLS 1.2 only
I upgraded the firmware image on the IDRAC6 to version 2.90 but it seems i can only enable TLS for 1.1 and up through SSH.
is there a way to only enable TLS 1.2 on the IDRAC6 for the DELL PowerEdge R710
We need to disable 1.0 AND 1.1
thanks
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
March 7th, 2018 14:00
Hello
Please send a private message with your service tag to ensure we have all appropriate information on your system.
Thanks
skylorcoker
1 Message
0
April 2nd, 2018 11:00
Did this ever get resolved? We are facing similar issues - would like 1.2 only and not 1.1 and above...
-S
BALI-BLUE-SURF
13 Posts
0
April 11th, 2018 13:00
In order to disable TLS 1.0 and 1.1 you will need to update the iDRAC6 to firmware version 2.9. Then after logging into the iDRAC go to the "iDRAC settings" tab on the left and then to the "Services" tab on the top bar. Now you should see the option to only use TLS 1.2.
MikeD-82
7 Posts
0
September 27th, 2018 05:00
I am on 2.91 and this option is not available.