Start a Conversation

Unsolved

This post is more than 5 years old

Z

2449

April 6th, 2016 04:00

Dell Poweredge M620 IDRAC Warning Meassage

I am currently getting a sporadic warning message in the lifecycle controller from a number of M620 blade servers which are installed in a Poweredge VRTX chassis. See below for warning message anybody have any idea why this is occurring

Event Message: Login attempt alert for NULL from NULL using NULL, IP will be blocked for NULL seconds.

Date/Time: Wed Apr 06 2016 10:02:11 -0500

Severity: Warning

 

Detailed Description: The account identified in the message is temporarily disabled because of consecutive unsuccessful Login attempts to iDRAC from the IP address identified in the message.

Recommended Action: Contact the iDRAC administrator and make sure the username and password credentials used are correct. Check the Lifecycle Controller Log (LC Log) to see if more unauthorized iDRAC access attempts are occurring than would be expected due to forgotten account names or passwords.

Message ID: USR0034

Detailed Description:
Unsuccessful login for the username, IP address, and interface identified in the message.
Recommended Action:
Make sure the login credentials are valid and retry the operation.
Comment: cmc root

Message ID: USR0031

Moderator

 • 

8.7K Posts

April 6th, 2016 16:00

Hi,

What version is the BIOS and iDRAC at? There have been some fixes for iDRAC communication.

BIOS http://www.dell.com/support/home/ca/en/cabsdt1/Drivers/DriversDetails?driverId=3WCCK

 

iDRAC: http://www.dell.com/support/home/ca/en/cabsdt1/Drivers/DriversDetails?driverId=3F4WV

 

CMC: <ADMIN NOTE: Broken link has been removed from this post by Dell>

6 Posts

May 2nd, 2016 03:00

Hello,

I am seeing the exact same issue on our PE M620 servers with the letter "E" appended to the end of the server name.

Here is our version of BIOS/iDRAC

Firmware Information

Name                     Version                         Enclosure ID   Type

System BIOS             2.5.2                                 1                           System BIOS

iDRAC7                     2.21.21.21 (Build 12) 1                           iDRAC7

Lifecycle Controller  2 2.21.21.21                 1                           Lifecycle Controller

might have to update the BIOS to 2.5.4 to see if it resolves the issue.

ALex

6 Posts

May 2nd, 2016 03:00

Hello,

I am seeing the exact same issue on our PE M620 servers with the letter "E" appended to the end of the server name.

Here is our version of BIOS/iDRAC

Firmware Information
Name Version  Enclosure ID  Type
System BIOS 2.5.2 1 1 System BIOS
iDRAC7  2.21.21.21 (Build 12) 1 iDRAC7
Lifecycle Controller 2 2.21.21.21 1 Lifecycle Controller
No Events found!

Top