This post is more than 5 years old
1 Rookie
•
81 Posts
0
16789
How to configure OME and iDRAC6/7
We have a Poweredge T310 and T320. The T310 has iDRAC6 Enterprise. The T320 iDRAC7 Express. I installed Open Manage Essesntials on the T320 and created an inventory. It finds all hardware in the network, but I don't find the iDRAC's.
Now i've been messing around with the iDRAC settings, so it's very well possible I screwed things up for OME. Read the OME manual and iDRAC manual, but I can't find information on how to setup OME and iDRAC for them to interact.
Is there a faq/paper/wiki explaining how to configure things to get is usable?
Simon
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
1
October 2nd, 2013 14:00
Hello Simon
It should use SNMP to discover the iDRACs. The IDRACs should default to SNMP enabled with a community name of public. Enable SNMP in OME and make sure the community names match and you should be good to go. Here is a whitepaper:
http://en.community.dell.com/techcenter/extras/m/white_papers/20061803.aspx
Thanks
Simon Weel
1 Rookie
1 Rookie
•
81 Posts
0
October 7th, 2013 03:00
Thanks! That did the trick for the iDRAC6 machine. The machine with iDRAC7 wasn't discovered yet - I'll check out the link you posted.
Simon