Unsolved
This post is more than 5 years old
13 Posts
0
1336
IDRAC 6 web interface does not shows information
Hello
I have a strange problem on my R910 server.
When I have run the racadm commands on the server I saw god outputs.
But when I login to the IDRAC web interface the IDRAC shows me that the server is off.
I have tried to reset the IDRAC, and perform flea power drain on the host.
Firmware levels:
OpenManage 9.1.0
System BIOS 2.11.0
DRAC 2.90
After DRAC reset the server information shows for some minutes, but maybe 1 mins later the DRAC shows the same.
Any idea?
I know that the motherboard replacement resolve many IDRAC issues, but the IDRAC can provide information from command line, so that`s why I do not want to replace the board, if it has a webpage issue.
Kalaso
13 Posts
0
September 5th, 2018 06:00
Somehow it should be related for OpenManage.
because I cannot open server:1311 webpage too.
Kalaso
13 Posts
0
November 16th, 2018 01:00
The motherboard replacement did not resole the problem.
If I reset the IDRAC the information shows for 2 minutes. but after that there is no more information on GUI.