Unsolved
This post is more than 5 years old
5 Posts
0
16292
IDRAC6: ERROR: Unable to send test trap. Please make sure that your trap has been configured correctly and connectivity to the destination endpoint exists.
I've been asked to cross post by Rob C. from the OME forum:
I have and I receive the same errors.
ERROR: Unable to send test trap. Please make sure that your trap has been configured correctly and connectivity to the destination endpoint exists.
My iDRAC7 and iDRAC 5 have no issues on the test traps. All are on the same subnets.
I receive successful modification messages after each configuration. Here is my racadm configs for the iDRAC6
config -g cfgOobSnmp -o cfgOobSnmpAgentCommunity hfhsread
config -g cfgOobSnmp -o cfgOobSnmpAgentEnable 1
config -g cfgIpmiLan -o cfgIpmiLanAlertEnable 1
config -g cfgIpmiLan -o cfgIpmiPetCommunityName hfhsread
config -g cfgIpmiPet -o cfgIpmiPetAlertDestIpAddr -i 1 10.19.137.16
config -g cfgIpmiPet -o cfgIpmiPetAlertEnable -i 1 1
config -g cfgIpmiPet -o cfgIpmiPetAlertDestIpAddr -i 2 10.19.137.19
config -g cfgIpmiPet -o cfgIpmiPetAlertEnable -i 2 1
testtrap -i 1
testtrap -i 2
Thanks