Unsolved
This post is more than 5 years old
40 Posts
0
8346
MD3000i MIB
Dears,
I have MD3000i SAN, and i want to integrate it with my SIEM Appliance to get snmp traps from it.
The SIEM Configuration needs the vendor id and its location in the MIB in order to complete configuration, could you please help me with that ?
The needed information used in the Configuration shown in the following image.
DELL-Jeff M
2 Intern
2 Intern
•
793 Posts
1
January 25th, 2013 16:00
Can your SIEM Appliance import MIB files? If so, look at the downloads page under System Management for a PowerEdge. You can find the Dell MIBs for PowerEdge there, which last I checked included the MIBs for other Dell hardware.
www.dell.com/.../poweredge-r510
areeb1988
40 Posts
0
January 26th, 2013 22:00
How could i get the vendor id and its location from the MIB as shown in the image ?
DELL-Jeff M
2 Intern
2 Intern
•
793 Posts
0
January 29th, 2013 16:00
The MIB files are basically a script to tell a program what the OIDs mean. The OIDs are all in there, but you'll have to parse the script manually. If your appliance can't import the MIBs you will be manually entering a ton of them.