Unsolved
This post is more than 5 years old
3 Posts
0
11526
OMSA 6.4 on XenServer 5.6 crashes R300 network interfaces
Hello Everyone,
Yesterday I installed OMSA 6.4 on one of our XenServer's running on a R300, everything seemed fine, but after using the omsa web it just stopped responding, I dug a little deeper and the core XenServer os keeps running, but the network interfaces (BCM5722) all die. I have tried restarting them manually but, was only able to get them back up and running with a reboot. I would be very thankful if anyone could help spread some light on this issue.
Servers running:
Citrix XenServer 5.6 (5.6.0-31188p Kernel 2.6.27.42-0.1.1.xs5.6.0.44.111158xen)
OMSA 6.4.0
Ares84
3 Posts
0
March 18th, 2011 09:00
Hello Everyone,
I'm still struggeling with with this problem. I there really no one else running OMSA on their XenServers.
/Troels
DELL-Jeff M
2 Intern
2 Intern
•
793 Posts
1
March 18th, 2011 17:00
I'd start with checking on your NIC drivers and firmware. If those are up to date, try installing OMSA in parts, and see if one particular part is the culprit.
Ares84
3 Posts
0
March 29th, 2011 07:00
Hi JEFFLM
I'm running
driver: tg3
version: 3.99p
firmware-version: 5722-v3.08, ASFIPMI v6.02
bus-info: 0000:01:00.0
driver: tg3
version: 3.99p
firmware-version: 5722-v3.08, ASFIPMI v6.02
bus-info: 0000:02:00.0
vdan02
2 Posts
0
June 21st, 2012 09:00
Ares -- have you located a fix for this issue?
Thanks,
vdan02
2 Posts
1
June 21st, 2012 10:00
Actually after troubleshooting my issue further, this appears to be an issue with the chipset itself. I have an onboard NIC in my R300 and when i used the onboard NIC rather than the built in, i do not expirience any issues.
Install an onboard NIC and see if this fixes the issue.
I am also using Xenserver 6.0 for reference.