Unsolved
This post is more than 5 years old
54 Posts
0
22529
PERC H700 integrated
I just upgraded my OMSA on my PowerVault NX3100 server then i found out the raid controller firmware is needed an upgrade. How do i upgrade the firmware? my firmware is 12.10.1.0001.
thanks
mondeep
30 Posts
0
November 12th, 2013 00:00
Hi,
Here is the link. It contains information on how to update as well - http://www.dell.com/support/drivers/us/en/555/GetDriver/InitiateSingleFileDownload?fileId=3000715483&driverId=K1HVJ&isInstallAvailable=True&isKCSArticleTobeShown=False&categoryId=SF&returnUrl=%2Fsupport%2Fdrivers%2Fus%2Fen%2F555%2FDriverDetails%2FProduct%2Fpoweredge-r710%3FdriverId%3DK1HVJ%26fileId%3D3000715483&isUSDownload=true
Let us know if this worked.
Regards,
Mondeep
jjec2013
54 Posts
0
November 21st, 2013 00:00
hi Mondeep, the link is not working anymore. sorry for the late reply.
DELL-Manfred W
Moderator
Moderator
•
166 Posts
0
November 21st, 2013 03:00
Hi jjec2013
Try this:- http://www.dell.com/support/drivers/us/en/555/DriverDetails?driverId=C3X7D
Let us know how it goes.
jjec2013
54 Posts
0
November 21st, 2013 04:00
Hi Manfred,
i'm using windows storage server standard 64bit so i will select the file "SAS-RAID_Firmware_C3X7D_WN64_12.10.6-0001_A12.EXE". right?
please check if the instruction below is correct?
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
DELL-Manfred W
Moderator
Moderator
•
166 Posts
0
November 22nd, 2013 03:00
Hi jjec2013
Yes, that is correct.
Let us know how it goes.