Unsolved
This post is more than 5 years old
1 Message
0
33924
PowerEdge R520 - MTBF, MTTR
Hi,
I need a quick help..!
I need the MTBF and MTTR figures for PowerEdge R520 Server. Below is the specification.
PowerEdge R520, Intel® Xeon® E-24XX v2 Processors Chassis Configuration: 3.5" Chassis with up to 4 Hard Drives and Software RAID Processor: Intel® Xeon® E5-2430 2.20GHz, 15M Cache, 7.2GT/s QPI, Turbo, 6C, 95W, Max Mem 1333MHz 2 x 4GB RDIMM, 1600 MT/s, Low Volt, Single Rank, x8 Data Width Windows Server® 2012R2,Standard Ed, Add License, 2 Socket and/or 2 VMs 5-pack of Windows® Server 2012 Device CALs (Standard or Datacenter) SW RAID 5 for S110 (3-4 SATA/SATA SSD HDDs) 2 X 500GB 7.2K RPM SATA 3Gbps 3.5in Hot-plug Hard Drive Broadcom 5720 DP 1Gb Network Interface Card On-Board Broadcom 5720 Dual Port 1Gb LOM Dual, Hot-plug, Redundant Power Supply (1+1), 495W NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord ReadyRails™ Sliding Rails With Cable Management Arm DVD+/-RW, SATA, Internal |
bhupendrachaudhari
7 Posts
0
August 30th, 2020 03:00
Sir/Madam,
I need the MTBF/MTTR calculation/document for R630/R730 with following service tag for my client
SERVER DELL PoweredgeR630 { {Svc tag removed by moderator}}
SERVER DELL PoweredgeR730 { {Svc tag removed by moderator}}
SERVER DELL PoweredgeR730 { {Svc tag removed by moderator}}
SERVER DELL PoweredgeR730 { {Svc tag removed by moderator}}
SERVER DELL PoweredgeR730 { {Svc tag removed by moderator}}
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
August 31st, 2020 08:00
Bhupendrachaudhari,
Dell no longer lists specific MTBF's for their servers. This is due to the huge variances in installed hardware, environments, along with just straight usage differences. They stopped being provided around the 11th generation servers.
Sorry I couldn't be more helpful.