Unsolved
26 Posts
0
2903
how to remove faulty OMIMSSC jobs?
Hi, I had 1 job that failed directly after adding in OMIMSSC. No idea why.
So i added the server again, again failed with other job name. Failed agian.
Adding server 3th time discovery was successfull in OMIMSSC.
Now there are 3 jobs for 1 server, i would like to remove the 2 faulty jobs.
This seems not possible, how to remove those faulty jobs?
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
October 8th, 2020 06:00
Hi,
I think this could be the reason why the job failed. " If multiple jobs are submitted simultaneously to the same device, the jobs fail. Hence, ensure that you schedule jobs for same device at different times." related link: https://dell.to/30KmgUO
Can you see any clear or remove button under Generic tab not under Running or History tab?
Please ensure you have local administrative privileges on the management server. Enable the Windows firewall rules. Wait for five minutes before you log in as an Admin so that all services are initiated.
Unfortunately, I do not have the opportunity to work on OMIMSSC. If you can share screenshots me and other friends on the forum can try to help.
Let us know if this helps!
Charlez79
26 Posts
0
October 12th, 2020 23:00
hi,
no there is no clear or remove button under Generic tab not under Running or History tab.
It's a connection to an idrac, so no firewall involved.
Now the only thing i can do is redeploy the appliance and start over from scratch.
There should be a possibility to remove a job.
Karl
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
October 13th, 2020 01:00
Hi, let me escalate this case and try to find out a way to remove a job. I'll inform you when I get any reply.
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
October 13th, 2020 23:00
Hi again,
I have some answers as below;
First of unfortunately there is no way to clean up jobs. We can send it as an Engineering request to add deleting jobs as a feature.
What we'd like to have to able to do this:
1) What version of OMIMSSC? There is the SCOM version and the SCCM/SCVMM version.
2) A service tag to attach the request to. (Please send service tag to me as a private message)
AnjanaRM
46 Posts
0
October 14th, 2020 23:00
Hi @Charlez79
Unfortunately at present the created job cannot be deleted. From your message it seems like the first two jobs might have failed due to incorrect credentials. Are all three jobs for the same iDRAC IP?
As a way to clean up at present, you can delete the discovered server (3rd time successful) by selecting its iDRAC IP from the Server View under Monitoring tab on the Dell EMC OpenManage Integration Dashboard. This effectively clears the discovery jobs associated with that server's iDRAC IP address and should delete the first two jobs also.
Once the deletion has completed, you would need to re-discover the server.
Thanks and regards,
Anjana
Charlez79
26 Posts
0
October 14th, 2020 23:00
Hi,
The cause was not failed credentials, the profile was set correctly. Yes, 3 times same idrac. (same ip).
Also removing the discovered server does not help, only the success full job is removed. Previous old faulty jobs are not removed, they stay.
Thorsten_S
45 Posts
0
May 11th, 2021 03:00
Hi,
did you find a way to remove those jobs ? We have run into the same issue and no suitable solution was provided.
Thanks
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
May 11th, 2021 05:00
Hi,
I did some research I found this information "If multiple jobs are submitted at the same time to the same server, the jobs fails. Therefore, ensure that you schedule jobs at different times."
Can you check that on pages 54 and 84; https://dell.to/3y2j2Lg
Hope this will helps!
Thorsten_S
45 Posts
0
May 11th, 2021 06:00
Hi Erman,
thank you for your feedback. Unfortunately, the documentation is not correct as there is no "Cancel" button on that screen. See my other thread on this topic which also has got screenshots:
https://www.dell.com/community/Microsoft-SCCM-SCOM-OpenManage/Deleting-discoveries-from-OMIMSSC/td-p/7821839
Thorsten
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
May 11th, 2021 07:00
Hi Thorsten, thank you for the information, I also read that thread. Actually, I think it should be very simple, but for some reason it does not exist. Especially in the screenshot of your first post, the checkbox is checked, but a method to remove the selected item is not specified. Unfortunately, I do not have a lab connection where I can actively work on it. But I'm doing a lot of research because it feels like it has to be done somehow. I feel stuck at this point. Can you take a look at this? https://www.dell.com/support/manuals/it-it/omimssc-sccm-scvmm-v7.2.1/omimssc-v7.2.1-sccm-scvmm-ug/deleting-servers-from-omimssc?guid=guid-930f1161-ce49-44fa-a4a5-38f18416004e&lang=en-us
Thorsten_S
45 Posts
0
May 17th, 2021 04:00
Hi @Dell-ErmanO
the linked document is for a different appliance which has the same name but connects into SCCM/SCVMM. We are using the OMIMSSC appliance which connects into SCOM.
The option to remove stale discovery jobs is just not there. I know that a newer version of the appliance is scheduled for July 2021. It would be great if you can check if this issue will be fixed as well
Thanks
Thorsten
DELL-Erman O
Moderator
Moderator
•
2.4K Posts
0
May 17th, 2021 06:00
Hi Thorsten, unfortunately, I could not find more information on the other thread than Anjana said. I found that but I think you are already checking them. https://dell.to/33NmJ9Z
Delete Dell EMC devices from OMIMSSC
Thorsten_S
45 Posts
0
May 27th, 2021 06:00
@Dell-ErmanO @AnjanaRM
we now have the situation that one of my colleagues has added a bunch of incorrect systems (ip addresses). Because of that no systems were discovered and we cannot delete the discovery from the list of found systems. We can see all of the incorrect systems in the scheduler and there is no way to remove them.
So what do we do ?
Dell-DylanJ
4 Operator
4 Operator
•
2.9K Posts
0
May 27th, 2021 12:00
I did some looking and spoke to a colleague about it because of what I found, but it looks like the only option would be to redeploy the tool, which may take a fair bit of effort. I've been advised that they're going to bring this to the attention of the devs, but I can't comment on what will be done, or when. That information is outside what I have access to.
Thorsten_S
45 Posts
0
July 22nd, 2021 08:00
I've just upgraded the appliance to version 7.3 and there is still no option to do that. How do we get that added as a feature request for the next version update ?
Thanks