Unsolved
1 Message
0
1024
iDRAC9 v3.15 Gen14 T440 Importing Server Configuration Profile from USB device
Hi
I have about 70 Servers to ship.
Stage one is to Prep Idrac,RAid and Bios
I have created a master Config.xml file which of I can quickly create unique versions of each server site with a find a simple find and replace of server names and IP.
During stage one I do not have a network
I am having difficulty with the "Importing Server Configuration Profile from USB device"
The T440 does not seem to have a wrench USB port i.e. a dedicated Idrac port like the T330. Can any port be used? Has anybody successfully used this process on a t440?
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
May 23rd, 2018 10:00
Hello
The technical guide states that it is the front USB port on the T440. It should be enabled by default. If it is not working then I suggest you check the settings to make sure it is enabled. There is a system BIOS setting and an iDRAC setting that both need to be enabled.
https://www.dell.com/learn/shared-content~data-sheets~en/documents~dell-emc-poweredge-t440-technical-guide.pdf
Thanks