Unsolved
This post is more than 5 years old
2 Posts
0
28347
/opt/dell/toolkit/systems/drm_files/apply_bundles.sh is invalid
Hello,
i am trying to create an bootable iso image by using DRM.
I am creating my own bundle end create the iso.
So far so good. I mount the iso file to the virtual media via idrac.
Everything goes smoothly, boot is ok, but when the systeme try to lauch the update, i have
/opt/dell/toolkit/systems/drm_files/apply_bundles.sh is invalid ...
please press enter to reboot.
I tried either with my own bundle or an existing bundle for R71, message always is the same.
I tried to custom my own apply_bundles.sh but no chance, still not working.
any ideas?
Regards.
Denis
dalligand
2 Posts
0
July 20th, 2012 06:00
Anyone?
Super Frog
2 Posts
0
September 26th, 2013 13:00
Same error here, except I'm booting from CD because I have to flash the iDrac firmware because it's bricked.
In fact, I can't get ANYTHING from DRM to work at all. I export a repo as SUU, but when I boot the system off of the SBUU DVD, and try to update the firmware, it says the repo is not a valid SUU.
Instead of making bootable update ISOs like their competitors, Dell throws half-baked tools at you so YOU can do all the work.
K Sashi
87 Posts
0
October 21st, 2013 07:00
SBUU firmware update feature cannot accept a SUU iso created from DRM.
Please use the original SUU iso available on support.dell.com and supply it as an input to SBUU firmware update.
Thanks,
Shashi.
jomach
9 Posts
0
August 17th, 2016 07:00
I'm having the same issue here.
Generated ISO from Dell Repository Manager. It works fine on all types of PE (620, 630, 710, etc) except on R720 with error message: /opt/dell/toolkit/system/drm_files/apply_bundles.sh is invalid.
Prior of that error I have mount error regarding the tool kit:
mount /dev/disk/by-id/wwn-0x0...-part1 /opt/dell/toolkit/system
COULD NOT MOUNT /dev/disk/by-id/wwn-0x0...-part1
It's almost like it would try to mount the dell toolkit on a SAN interface, trying with a bunch of WWNs...