Unsolved
This post is more than 5 years old
2 Posts
0
27507
use DRAC(recite.py script) to power management on dell server
Hi,
I wanna use recite.py script to power management on dell server.(en.community.dell.com/.../3757.recite-interactive-ws-man-scripting-environment)
I can use recite.py script to check dell server status, but when I waanna change power status, It's fail.
when I run "RequestPowerStateChange PowerState=8"
It's return following message:
wsman invoke -a RequestPowerStateChange "schemas.dmtf.org/.../DCIM_CSPowerManagementService" -h 10.30.199.198 -P 443 -u root -p ****** -V -v -c dummy.cert -j utf-8 -y basic -J /tmp/tmpTc0Qzm
schemas.dell.com/.../DCIM_CSPowerManagementService">
schemas.xmlsoap.org/.../addressing" xmlns:w=" schemas.dmtf.org/.../wsman.xsd">
schemas.xmlsoap.org/.../anonymous<;/a:Address>
schemas.dell.com/.../DCIM_ComputerSystem<;/w:ResourceURI>
DCIM_ComputerSystem
srv:system
root/dcim
8
Fault
Code
Value = s:Sender
Subcode
Value = wsa:DestinationUnreachable
Reason
Text = No route can be determined to reach the destination role defined by the WS-Addressing To.
Detail
FaultDetail = schemas.dmtf.org/.../InvalidResourceURI
Server model is "PowerEdge R620".
what's wrong is it?
ajay_shenoy
15 Posts
0
June 11th, 2015 06:00
Hi,
RequestPowerStateChangeq is not a valid command. Have you modified the recite script? Recite uses the command name within the invoke call. Therefore you might be seeing a failure because the correct command is RequestPowerStateChange and not RequestPowerStateChangeq.
Regards,
Ajay
lihlcnkr
2 Posts
0
June 11th, 2015 17:00
sorry, I miss spelled command.
but after use command
RequestPowerStateChange PowerState=8
it's fail too.
the result is same,
No route can be determined to reach the destination role defined by the WS-Addressing To