Unsolved
This post is more than 5 years old
37 Posts
0
98580
Venue 11 Pro 7130 WiDi connection issues.....
I have a new Venue 11 Pro (7130) Intel core i5 -4210Y, 128 GB SSD 4GB RAM and tried to connect via WiDi to my TV that has a NETGEAR Push2TV (PTV3000) connected and I was not able to figure out how to make this work.
Firstly the Push2TV was in ready mode with the connection code on the tv screen.....next I navigated in the Venue 11 to the connect wireless display screen and when this was selected it started searching for devices but couldnot find the Push2TV device.
Is there something that I'm missing?
One reason for buying the Venue 11 was that it supports WiDi (Near Field Communication) or so I thought it did?
dnatrance
1 Message
0
January 24th, 2014 13:00
I noticed it didn't work until I installed the Bluetooth drivers off of dells site... not sure what it has to do with WiDi/Miracast, but I tried it with 2 of them and installed everything but the Bluetooth driver and they wouldn't connect. Installed the Bluetooth driver and it worked.
DELL-Brian B
828 Posts
0
January 24th, 2014 20:00
I have had no problems with the 7130 and Miracast. Make sure you've updated the firmware on your PTV3000 - there are probably at least a few revisions posted that are newer than what it shipped with. These fix all sorts of issues.
Phil Venue 11
37 Posts
0
January 25th, 2014 08:00
Thanks for the advice.....WiDi now working....had to update the PTV3000 firmware it was really old version of firmware.
Only issue is with choppy audio....any suggestions?
Laurent T
10 Posts
0
February 13th, 2014 06:00
Laurent T
10 Posts
0
February 13th, 2014 08:00
bribiesca
67 Posts
0
February 15th, 2014 19:00
I have same issue.
JJDynomite
16 Posts
0
February 15th, 2014 20:00