Unsolved
This post is more than 5 years old
2 Posts
0
399841
Venue pro 11 dock Displayport to DVI
I want two monitors and have a HDMI monitor connected and working. I tried to connect the second monitor through a Displayport to DVI cable and get no signal. The system seems to recognize that a generic monitor is connected. Should this work? Is there something that needs to be configured?
SpedInFargo
11 Posts
0
December 16th, 2013 12:00
See the other thread about the dock. I cannot get the Displayport to output anything and I cannot get the HDMI port to correctly output to a DVI monitor with an adapter.
Seems to be some problems with the video outputs on the dock...
DELL-Brian B
828 Posts
0
December 16th, 2013 20:00
You can only run dual monitors via the desktop dock if you have the 7130 (not the 5130). I've tested it and got them working at FHD. There are some posts on the forums about weird issues though that we're still looking into. Which system do you have?
jbailey898
2 Posts
0
January 8th, 2014 14:00
I have a Venue Pro (7130) and am trying to get dual monitors working through the dock using a DisplayPort to DVI adapter. I can't get any output via the DisplayPort while using the adapter. Should this work?
DELL-Brian B
828 Posts
0
January 8th, 2014 14:00
hackasaurus
1 Message
0
February 10th, 2014 15:00
Hi Brian... we have not had this level of success, I'm afraid. We haven't tried DP monitors though.
Even HDMI to VGA output from the dock is inconsistent depending on the version of video driver we try.
Can you confirm the version of the Intel HD4400 driver you are using to get these results?
Also, has there been any hardware revisions of the dock K10A other than 001?
Thanks
JJDynomite
16 Posts
0
February 14th, 2014 09:00
Tiger1050
1 Message
0
March 19th, 2014 11:00
I have 30 7130 models with Docking Stations. We are using ACCEL active Display Port to DVI adapters and USB Pluggable cables. I am finding 95 % are working just fine. The other 5 % are having issues. On one particular 7130 with Docking Station when you power it on only one 1909 display and the Tablet monitor will have a display. I changed the cables between the two 1909 flat panels and the display that was hooked on the pluggable USB connection always worked and the Display port would not. I tried another Accel active Display port to DVI cable, switched Docks, tried a non-active BizLink cable and no luck. However when the setup was switched to the original dock with the original Accel cable and the power to the dock was removed and restored it worked. It has Bios 10, Windows 8.1 Enterprise. all updates.
Question why is it working when you remove and restore power?
Asyeager
1 Message
0
March 28th, 2014 11:00
I have two Samsung S23C350 monitors which have a VGA and an HDMI port. I am able to get one working with the HDMI to HDMI from the Dell Dock. I have a DisplayPort to HDMI adapter to the second (3rd) monitor which will not work it recognizes the 3rd monitor but will not send an outpout. It keeps giving me this error: "The display settings could not be saved. Please try a different combination of display settings."
I do not have a DP port on either monitor. the only other method I have not tried is DP to DVI/VGA?
I believe I have a Venue 11 Pro 7130 (how do i verify?)
BrentNorrisKY
2 Posts
0
March 31st, 2014 07:00
I do am having this problem with my 7130. The HDMI seems to work fine and consistently, but any DP to DVI adapter I use failed to do anything. I haven't tried with a DP monitor as I don't have any. If Dell would like to send me one, I would love to test it and see if it will work. :-)
ckongkeo
1 Message
0
April 9th, 2014 17:00
I've suffered through this scenario also. I'm using the Dell Venue 11 Pro (7130) and the K10A dock. After a month+ wait and several escalations with Dell Support, they finally informed me that the K10A doc revision A00 doesn't properly support dual monitors. They had shipped out a K10A revision A01 and it does work properly without the need of "active" adapters. I've got 3 screens working - dual external monitors along with the tablet screen itself (on Win8.1pro) .
I've tested this with DP to DP monitor, DP to DVI monitor. HDMI to DVI monitor. Works properly now.
SeanBezuids
17 Posts
0
April 10th, 2014 04:00
Hi
I am glad to see we finally seem to have a solution to this however shipping a new dock to every customer with the problem might be an issue.
Is there a way to update the BIOS on the dock itself without having to replace it?
It would seem likely that an update from A00 to A01 should be possible locally.
Thanks
Sean
lutzbobo
7 Posts
0
April 16th, 2014 08:00
DELL-Brian B
828 Posts
0
April 16th, 2014 09:00
We found a monitor internally that doesn't seem to work consistently as well (Dell U2312H). This one does seem to work if we go to the much older video driver. (http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/dell-venue-11i-pro?driverId=PM0V7&fileId=3341758704&osCode=WB64A)
Can you guys who are seeing problems with DP try this and let me know your results by monitor model and driver version?
I'll get the details pushed to engineering to get this resolved - probably just need some more video driver tweaks for certain monitors.
lutzbobo
7 Posts
0
April 16th, 2014 11:00
lutzbobo
7 Posts
0
April 16th, 2014 11:00