1 Rookie
•
11 Posts
0
1789
Create Unity Tradtional pool
Hi,
I have unity 300 with code 4.4 and one traditional pool 15 disk 600GB , we need to add 5 disks flash but dynamic pool minimum drives is 6 so we need too create traditional pool by command. /storage / config / create but not working , any solution .
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 2nd, 2022 15:00
Hello Mahmoud Maarek,
You will need to open a support case so that we can see why you are not able to create another pool.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
February 28th, 2022 13:00
Hello Mahmoud Maarek,
Here are a couple of kb’s that maybe of assistance.
https://dell.to/3II6PQM
https://dell.to/3ssJzka
Mahmoud Maarek
1 Rookie
1 Rookie
•
11 Posts
0
February 28th, 2022 14:00
hi ,
thanks for this two KB but i have syntax error when you type command
uemcli /stor /config/profile -traditional -configurable show
current code is 4.4 and unity cli is 5.1
he can't recognize traditional and when i remove traditional not show any profile start with letter t but the existing pool is traditional with sas drives with maximum no. of drives . i need to create ssd with 5 drives
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
February 28th, 2022 15:00
Hello Mahmoud Maarek,
Are the 15 drives that are in the system SSD or Triditional HDD?
Mahmoud Maarek
1 Rookie
1 Rookie
•
11 Posts
0
February 28th, 2022 22:00
Hi ,
the existing pool type is Triditional with 15 sas drives , we had upgrade with 5 drives flash ssd 400GB only solution is to create new pool as Triditional also .
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 1st, 2022 11:00
Hello Mahmoud Maarek,
Since you have SSD as your new drives you will need to create a new pool. What raid type were you wanting the new pool to be?
Mahmoud Maarek
1 Rookie
1 Rookie
•
11 Posts
0
March 1st, 2022 14:00
Raid5
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 1st, 2022 16:00
Hello Mahmoud Maarek,
You should be able to create a second traditional pool as you have the required amount of drives for a raid5.
Mahmoud Maarek
1 Rookie
1 Rookie
•
11 Posts
0
March 2nd, 2022 03:00
hi ,
my problem is i can't create traditional pool with new five SSD drives from cli
as explained the command as per your kb attached to create pool isn't recognized word traditional at type argument
Rainer_EMC
8.6K Posts
0
April 3rd, 2022 06:00
maybe your problem is because you dont have a matching SSD spare