Unsolved
This post is more than 5 years old
10 Posts
0
1365
Extreme Networks Twinax and Unity 350F
Hi guys,
i have a customer who is planning to connect a Unity 350F to Extreme Networks 10G switches via Twinax Cables
do we know if this is supported with either Dell EMC or Extreme networks cables?
really appreciate it!
Thank you!
mapostol
10 Posts
0
February 14th, 2018 02:00
Hi
thank you for the answer
so i should be ok with any of these options:
D3TX-TWAX-1MAF
D3TX-TWAX-3MAF
D3TX-TWAX-5MAF
Rainer_EMC
8.6K Posts
0
February 14th, 2018 02:00
it would have to be active TwinAX not passive
Rainer_EMC
8.6K Posts
1
February 14th, 2018 05:00
yes these are active TwinAX cables - usually Amphenol
if they work with the switch you should be ok
mapostol
10 Posts
0
February 14th, 2018 07:00
Thank you for the information!
i really appreciate it.
M.
Rainer_EMC
8.6K Posts
0
February 14th, 2018 07:00
passive TwinAX should also work but we only sell active cables
kelleg
4.5K Posts
0
February 21st, 2018 08:00
Please be aware that we have seen a few instances where some twinax cables have not worked (the one that I can recall involeved HP cables).
glen