Unsolved
This post is more than 5 years old
2 Posts
0
12535
The host does not have initiators logged into the storage system
Hi,
I have an EMC unity 300 Unisphere software version 4.2.1.95
I have two host (W2012R2)working fine (lun presented,etc..). For example SWPHYP01:
Now, I need to add two new servers (2 Virtual machines). I configured the network and both VM(swpsql03 and swpsql04) ping the Ip Storage system but I can't add or configure initiators properly. For example swpsql03:
I need to install something to the VM? Unisphere Client?
I think I have to configure SP's? But how with the new's IP?
Someone can help me
Thanks a lot!!
omoyano
2 Posts
0
February 15th, 2018 05:00
Yes of course and I find the unit.
But all inactive
DELL_ChrisHolloway
125 Posts
0
February 15th, 2018 05:00
Have you configured the software iSCSI initiator on the hosts to point at the target IPs on the Unity array?
kelleg
4.5K Posts
0
February 21st, 2018 09:00
Take a look at the below white paper - the iSCSI section contains a detailed process for setting up the Windows host
https://support.emc.com/docu69325_Dell_EMC_Unity_Series_Configuring_Hosts_to_Access_Fibre_Channel_(FC)_or_iSCSI_Storage.pdf?language=en_US
When you setup iSCSI on the Windows host you want to not use the quick setup - that misses some important steps.
glen