Unsolved
This post is more than 5 years old
1 Rookie
•
60 Posts
0
1199
Unity Replication specification
Hi
we want to keep two connections of another segment at Target Site.
The Unity can not communication to Site① frome Site②, and vice versa.
Unsolved
This post is more than 5 years old
1 Rookie
•
60 Posts
0
1199
Hi
we want to keep two connections of another segment at Target Site.
The Unity can not communication to Site① frome Site②, and vice versa.
Top
kojimk1
1 Rookie
1 Rookie
•
60 Posts
0
March 12th, 2018 05:00
Sorry,
- When Unity has 2 or more replication interface, Unity should see all the network async replication ports on the destination Unity? If correct, there are any workaround ?
- I think if Unity select replication interface for each "Replication Connection", 2:1 replication can be success. Please tell the way to do that.
Rainer_EMC
8.6K Posts
0
March 12th, 2018 05:00
I dont understand - is there a question ?
Rainer_EMC
8.6K Posts
0
March 12th, 2018 07:00
yes if you are replicating from A to B than both systems need to be able to reach each other - both on mgmt network and replication mgmt/data ports
details on ports used are in the Unity security configuration guide
IMHO the setup in your picture should work IF you arent replication from source site 1 to source site 2
If it doesnt work open a service request so that it can be troubleshooted why
kojimk1
1 Rookie
1 Rookie
•
60 Posts
0
March 12th, 2018 17:00
Hi Rainer,
Replication configuration.
Site1 to replication target site.
Site2 to replication target site.
When the target site Unity has 2 replication interface(and connection), should the target site Unity see(and/or routing) all the network async replication ports?
Rainer_EMC
8.6K Posts
0
March 13th, 2018 01:00
if you dont replicate between site1 and site2 that shouldnt be necessary
you can set this up in a lab using VSA's to verify