This post is more than 5 years old
28 Posts
2
14481
Unity list of events or MIB
Hi folks,
I can't find a list of the events that Unity can send via Trap SNMP. Also the MIB file would be valid.
Anybody knows if this information is available in support.emc.com or any other place?
Thanks for your help!
Regards,
Jorge Florencio
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
December 19th, 2016 22:00
It is already available in support zone https://download.emc.com/downloads/DL80697_Unity_Alert_MIB_(Management_Information_Base).mib?source=OLS
Rainer_EMC
8.6K Posts
1
December 14th, 2016 10:00
If you have an urgent need you can use the VNXe3200 MIB file which works for Unity as well
A Unity MIB file will be posted shortly
PaLo
28 Posts
0
December 16th, 2016 00:00
Thanks for your help!
PaLo
28 Posts
0
December 19th, 2016 23:00
Thanks!
Do you know if I can configure SNMP v2 for notifications? I only can see v3 from the GUI.
Regards,
Jorge.
AndreD Dell
Moderator
Moderator
•
239 Posts
0
December 20th, 2016 00:00
Unity only supports v3. Have a look at this KB:
https://support.emc.com/kb/488777
hposen
8 Posts
0
July 21st, 2017 11:00
Hi, I am also trying to get SNMP v3 working on my Unity 300F. We are sending our traps to an HP OV NMMi sever but it is being rejected because it doesn't have the correct Engine ID which their documentation states we must enter their ID number somewhere. I already have download the SNMP v3 MIB file.
Here is a sample of the error when trying to send a test SNMP trap:
nnm.log.2:2017-07-18 14:36:40.706 WARNING [com.hp.ov.nms.trapd.NMTrapData] Trap_source_address_/10.XX.YY.121_is_not_hosted_on_a_node_that_is_managed_by_NNM
nnm.log.2:2017-07-18 14:36:40.707 WARNING [com.hp.ov.nms.trapd.NMTrapData] Failed to parse trap from /10.XX.YY.121: Unknown engineId 80 00 04 73 05 08 00 1B FF DF 79 for address 10.XX.YY.121
nnm.log.2:Failed to get engine parameters for trap from 10.XX.YY.121
Any help will be appreciated. Thank you,