VMAX
Posts
This post is more than 5 years old
Solved!
Go to Solution24 Posts
0
2101
June 13th, 2013 08:00
ACLX
Why ACLX device on a Vmax is shown as WD. My query is does this device status changes during the configuration changes ?
Responses(2)
1
0
1
2
0
4
2
0
4
35
0
4
14
0
2
No Events found!
codyhosterman
286 Posts
0
June 13th, 2013 09:00
The ACLX device does not actually store any data/information so does not need to ever be RW and it will not change to RW unless manually set as such which is not recommended.
AranH1
2.2K Posts
0
June 13th, 2013 10:00
To add to what Cody stated, the ACLX is really only needed for the intial setup of the array until gatekeepers can be masked to your management hosts (and it is really not even needed for that anymore with SMC/Unisphere running on the Service Processor). Once you have gatekeepers masked to hosts running Solutions Enabler you can unmap the ACLX from the frontend ports.
This is covered in the following primus:
emc204637: Symmetrix Configuration recommendations when mapping the VCM or ACLX database gatekeeper volume (VCM or ACLX gatekeeper) to host channels