Unsolved
This post is more than 5 years old
14 Posts
0
470
Is there a way to see what snap group is holding the most savepool?
My question above, I feel is a simple one but hard to answer...EMC seems unable to answer...
How can I tell which snap/snapgroup is holding the most savepool?
Normally the most logically is the OLDEST snap out there, but we have found not necessarily so...If we find a DB with a high savepool we usually start with the
oldest snap which most times, will NOT free up the most savepool space.
Is there a SYMSNAP command that I am not seeing in the CLI that will provide this type of information?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
January 17th, 2012 11:00
symsnap list -sid 123
dump source and target device column into a text file and then symsnap -sid 123 -f query , see which one has the most tracks changed.
ACPRATICO1
14 Posts
0
January 17th, 2012 13:00
does not quite add up....we have multiple snap groups and within the group there are multiple source and VDEV devices.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
January 17th, 2012 13:00
if you run symsnap list …it does not list all devices that are currently have an active snap session ?