This post is more than 5 years old
49 Posts
0
1954
RA director information
Hi, I need the CLI commands to get detailed information about my RDF directors, For eg, The IP address for my RE directors and WWN for RF's.
This post is more than 5 years old
49 Posts
0
1954
Hi, I need the CLI commands to get detailed information about my RDF directors, For eg, The IP address for my RE directors and WWN for RF's.
Top
Avinash V
91 Posts
0
July 29th, 2013 05:00
symcfg list -sid xxx -ra all -v
Check for "WWN Node Name" and "iSCSI IP Address"
A-J1
49 Posts
0
July 29th, 2013 08:00
Thanks, i was giving the command without the -v option maybe thats why i wasn getting the info
Fenglin1
2.1K Posts
0
July 29th, 2013 21:00
You can also use -switched command to display all RDF groups on the local Symmetrix array and its remotely connected Symmetrix arrays.RDF groups are listed as static or dynamic under the group type.
symcfg list -ra all -switched
pablosanzoni_bn
22 Posts
0
November 11th, 2013 13:00
Hi A-J;
It doesn't matter if you put -v flag or not, -v will give you a more detailed outcome, so if you don't include it your command will also work, the only difference if that only a summary if gonna be shown to you. What I told you before applies to mostly symcli commands, I mean, you always have the choice to include -v flag or not, depends on specific case.
I hope it helps
Regards,