Unsolved
This post is more than 5 years old
2 Posts
0
1312
VNX to VMAX
hi,
can I know the steps use for migration from VNX to VMAX all flash and how its done tell me briefly ...
thanks
harii
Unsolved
This post is more than 5 years old
2 Posts
0
1312
hi,
can I know the steps use for migration from VNX to VMAX all flash and how its done tell me briefly ...
thanks
harii
Top
bool
1 Rookie
1 Rookie
•
9 Posts
1
December 20th, 2017 06:00
Hi Harii,
first refer to interoperability matrix look below VMAX 100k and check level supported VNX arrays
https://elabnavigator.emc.com/eln/components?25/2/73563/71974/75149
NOTE: ORS and VMAX3 only supports hot and cold pulls, Push function is not supported at this time
refer to page 454 for more information about OR hot and cold pulls
https://support.emc.com/docu68921_Solutions-Enabler-Array-Controls-and-Management-8.2.0-CLI-User-Guide.pdf?language=en_US
regards,
Oleh
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
December 20th, 2017 10:00
SANCopy is the easiest way, you can find SANCopy documentation on the support website.
HARII
2 Posts
0
January 22nd, 2018 02:00
hi bool and dynamo,
thanks for your updates on this..!