Unsolved
This post is more than 5 years old
23 Posts
0
685
2580 Alerts on VNX 5700
Hi All,
We have a VNX 5700 running in our environment and we getting 2580 Alerts in SPA event logs saying Bus 1 Enlcosure 0 is faulted.
But on the array faults everything looks green and enclosure is showing in a enabled state. Becuase of these 2580 alerts the bus 1 enlcosure 0 is bliking in amber continuosly. EMC was enagaged restarted the management servers on SP's but that didnt solve the issue. and next step EMC is recommending to reboot the SP's
Did anyone had the same issue. Is there any other way to fix/stop the amber light flashing on the bus other than SP reboot.
Its a VNX 5700 (code running 5.32.000.5.215). Currently there is no impact on the array and no faults showing on the array but we have the bus flashing non stop in amber.
Thanks
Roger_Wu
2 Intern
2 Intern
•
4K Posts
0
August 27th, 2014 17:00
Could you post the output of the command "naviseccli -h getcrus"?
If all your hosts have the active paths to both SPs, you can try to reboot the device one after one.