i'm install vmx5300, when i' m trying to login unisphere with user nasadmin and default password nasadmin, login falied. I canno't change scope global to local.
If you use the nasadmin/nasadmin for control station access (ssh or VIA) and sysadmin/sysadmin (use local not global) for Unisphere (connecting to CS0 IP not (SPa or SPB) you should get in.
Kumar_A
727 Posts
0
April 14th, 2011 06:00
Also nasadmin is a local user for the control station.
Julien_LECORRE
92 Posts
0
April 14th, 2011 06:00
Hi,
take a look at this thread : https://community.emc.com/message/540288#540288
you should be using sysadmin/sysadmin to log into Unisphere
Rainer_EMC
8.6K Posts
0
April 14th, 2011 06:00
You need to use sysadmin / sysadmin for VNX and cant use local scope for GUI login in the current release
Rainer
vhelio
5 Posts
0
April 14th, 2011 06:00
I just reding this theard but i don't resolve my problem
RolandUK
4 Posts
0
January 9th, 2013 07:00
If you use the nasadmin/nasadmin for control station access (ssh or VIA) and sysadmin/sysadmin (use local not global) for Unisphere (connecting to CS0 IP not (SPa or SPB) you should get in.