Unsolved
This post is more than 5 years old
100 Posts
0
1301
Create RAID Group on disk 2 and 3 on VNX 5300?
Hello,
It it good idea to create raid group from disk 2 and 3 on DPE on VNX5300?
I will use to put there some private LUNs(clone,snap,mirror wiev).
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 10th, 2011 04:00
i would not, those drives contain VNX operating system.
angel_isakov
100 Posts
0
November 10th, 2011 05:00
Hmm on disk 0 and disk 1 is VNX OE i think.
According to Unisphere disk 2 and 3 are empty and can be used for raid group.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 10th, 2011 05:00
take a look at the best practices documents that have been recommended to you in other threads.
btw ..don't forget to close your threads and mark them as Answered if you have received satisfactory response.
Thanks
Vipin VK
812 Posts
0
November 10th, 2011 05:00
Hi angel,
The first 4 disks will have the vault and will contain system information. As you told VNX OE will be there in disk 0 and 1 but will have a mirrored copy in 2 and 3 also.
Vipin V.K