Unsolved
This post is more than 5 years old
47 Posts
2
16555
EMC® VNX™ Series
The VNX series (VNX5100, VNX5300, VNX5500, VNX5700, and VNX7500) targets the high-performance, high-scalability requirements of midsize and large enterprises. VNX family software is available in comprehensive packs or modular suites.
EMC Data Protection Advisor for Replication Analysis is included in the VNX Application Protection software suite.
EMC Unveils Record-breaking Storage Innovations – Press Release
EMC Unveils New VNX Unified Storage Family – Press Release
VNX Software Suites Data Sheet
VNX Total Protection Pack with RecoverPoint/SE in Unisphere Demo
horhay33
13 Posts
0
March 2nd, 2011 12:00
Hi Guys
Could you tell me is there a tool to calculate the iops from each vnx with tray and disk numbers etc
we are pushing a vnx to a customer and they are requesting performance details to compare to an eva
any help would be greatly appreciated :-)
nandas
1.5K Posts
0
March 4th, 2011 16:00
Jeff,
This is very much useful for all. I 'll suggest to make this post appear in the "Documentation" section or at least as "Feature" post, so that it is always on top.
My 2 cents
Sandip
justsanjeev
72 Posts
0
February 14th, 2012 22:00
which tool is used for the report generation in vnx ??
justsanjeev
72 Posts
0
February 15th, 2012 04:00
Thanks Dynamox,
is it unisphere or unisphere analyzer , please correct me ...
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
February 15th, 2012 04:00
what report are you trying to generate ? Some capacity/configuration reports are built-in into Unisphere.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
February 15th, 2012 04:00
if you need performance information, you would need Unispehre Analyzer.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
August 2nd, 2012 11:00
https://community.emc.com/thread/123842
sangil1
2 Posts
0
August 2nd, 2012 11:00
What is the layout of the Sp's? Where is SPA0 and wwn?( VNX5300)
sangil1
2 Posts
0
August 2nd, 2012 11:00
SPA0-- wwn
SPA1--wwn
SPA2--wwn
SPA3--wwn
SPB0-wwn
SPB1-wwn
SPB2-wwn
SPB3-wwn
Also where on the back of th sp's are the ports?