Unsolved
This post is more than 5 years old
13 Posts
0
619
FC Fabric connectivity best practice
Hello I am looking for a documentation that support that the FC Fabric connectivity best practice for VNX in a dual fabric environment is to balance the SP ports to the SAN FC Swiches like this:
if we have:
SPA0-SPA1-SPA2-SPA3 and SPB0-SPB1-SPB2-SPB3
FC Switch1 and FC Switch2
The bets way to connect it is:
Switch1: SPA0-SPB0-SPA2-SPB2
Switch2: SPA1-SPB1-SPA3-SPB3
Thank you
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 5th, 2015 11:00
SPA0 and SPB0 should be on separate fabrics in case you decide to use MirrorView, so i would do something like this:
Fabric A : SPA0, SPB1, SPA2, SPB3
Fabric B: SPB0, SPA1, SPB2, SPA3