Unsolved
This post is more than 5 years old
5 Posts
0
699
Many filesystem not mounted following standby CS reboot
This is a new install and there was a problem with getting the time set on the standby. I executed a reboot of the standby using the nas_cs reboot command. Following the reboot, the following filesystems did not get mounted:
/nbsnas
/nas
/nbsnas/dos
/nbsnas/jserver
/nas/jserver
/nbsnas/var
/nbsnas/var/dump
/nbsnas/var/auditing
/nbsnas/var/backup
/nbsnas/var/emcsupport
/nbsnas/var/log
/celerra/commoncache
/celerra/ccc
/celerra/wbem
/nbsnas/udoctor
/nas/udoctor
...so it appears that the startups following the reboot are not executing or aborting. I am looking through logs for a clue and have opened an SR, but thought perhaps someone in the community might have suggestions on what to look for.
charlieb75
5 Posts
0
May 2nd, 2014 11:00
Thanks. EMC support also just verified this.
Rainer_EMC
8.6K Posts
0
May 2nd, 2014 11:00
That is normal – these file systems are only mounted on the currently active control station