Unsolved
This post is more than 5 years old
59 Posts
0
3128
RELICATION FAILED
HI,
WE ARE GETTING FOLLOWING ERROR.
NSG2_VNXVG2: validating 1 interface pairs; please wait ... failed
Error 13160415803: The following interfaces cannot connect: source interface=192.168.254.236 destination interface=192.168.162.39, Message_ID=13160415819: Unable to connect to destination interface via DIC service.
CAN ANY ONE HELP ME N RESOLVING ISSUE
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 06:00
can you ping target control station, how about target datamover ?
Srik1920
59 Posts
0
June 19th, 2012 07:00
ya..dynamox we can ping target control station and datamover.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 07:00
are you pinging from your pc or you are actually pinging from the datamover itself ?
server_ping server_2 -i
Srik1920
59 Posts
0
June 19th, 2012 07:00
[nasadmin@NSG2 ~]$ server_ping server_2 192.168.254.236 192.168.162.39
server_2 : 192.168.254.236 is alive, time= 0 ms
Srik1920
59 Posts
0
June 19th, 2012 07:00
[nasadmin@NSG2 ~]$ server_ping server_2 -i 192.168.254.236 192.168.162.39
server_2 :
Error 6: server_2 : No such device or address
n= : unknown interface
sorry,i forgot add i earlier
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 07:00
server_ping server_2 -i 192.168.254.236 192.168.162.39
Srik1920
59 Posts
0
June 19th, 2012 07:00
Hi dynamox.replication interface name is NSG2_repl
[nasadmin@NSG2 ~]$ server_ping server_2 -i int01 192.168.162.39
server_2 : 192.168.162.39 is alive, time= 7 ms
[nasadmin@NSG2 ~]$ server_ping server_2 -i NSG2_repl 192.168.162.39
server_2 : 192.168.162.39 is alive, time= 7 ms
[nasadmin@NSG2 ~]$ nas_cel -interconnect -list
id name source_server destination_system destination_server
20001 loopback server_2 NSG2 server_2
20003 NSG2_VNXVG2 server_2 VNXVG2 server_2
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 07:00
what is the interface name, i want to make sure you can ping using the correct interface on the source.
Also paste output from "nas_cel -interconnect -list"
Srik1920
59 Posts
0
June 19th, 2012 07:00
[nasadmin@NSG2 ~]$ server_ping server_2 192.168.162.39
server_2 : 192.168.162.39 is alive, time= 7 ms
[nasadmin@NSG2 ~]$ server_ping server_2 192.168.162.40
server_2 : 192.168.162.40 is alive, time= 3 ms
i am trying to ping from source datmover.
Srik1920
59 Posts
0
June 19th, 2012 08:00
[nasadmin@NSG2 ~]$ server_route server_2 -list
server_2 :
default 192.168.254.225 0.0.0.0 int01
net 192.168.254.224 192.168.254.235 255.255.255.240 int01
net 128.221.253.0 128.221.253.2 255.255.255.0 el31
net 128.221.252.0 128.221.252.2 255.255.255.0 el30
host 127.0.0.1 127.0.0.1 255.255.255.255 loop
Srik1920
59 Posts
0
June 19th, 2012 08:00
[nasadmin@NSG2 ~]$ server_ifconfig server_2 -all | grep 192.168.254.236 -B2
UP, ethernet, mtu=1500, vlan=0, macaddr=0:60:16:3e:a4:2c
NSG2_repl protocol=IP device=trk0
inet=192.168.254.236 netmask=255.255.255.240 broadcast=192.168.254.239
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 08:00
server_ifconfig server_2 -all | grep 192.168.254.236 -B2
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 19th, 2012 08:00
server_route server_2 -list
Srik1920
59 Posts
0
June 20th, 2012 08:00
Hi,
dynamox,can u please suggest anything regarding this
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
June 20th, 2012 08:00
from the target array you can ping the source ok ?