Unsolved
This post is more than 5 years old
25 Posts
0
3409
Reconfigure CX600
Hi people,
I'm completely new to EMC and to the clariion CX600 Storage.
I received this storage system without any documentation, so it took me some time to get the cabling right.
The system now boots properly and i managed to login after a password restore.
What i would like to do, is change the whole LUN/Raid setup.
I know that the first 5 disks are used for the OS and flare (right?)
Can i delete all LUN's en RAID groups to start over again, without losing Navisphere(OS) or flare?
thanks in advance!
Here's the current disk (4 arrays) setup:
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 3rd, 2010 04:00
you don't see flare portion of the system so you can safely delete LUNs/Raid groups (i assume nothing is attached to the system)
Thomasz1
25 Posts
0
December 3rd, 2010 04:00
Well, there´s no option in navisphere to touch the reserved space on the first 5 disks, right??
Unfortunately I can't post in the clariion category.
Thomasz1
25 Posts
0
December 3rd, 2010 04:00
I only got a Powerlink Lite View account.. i guess there's no support contract for this product anymore..
Setting up the storage system is a goal of my internship over here..
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 3rd, 2010 04:00
good luck, CX is an easy platform to manage. Post back if you have questions.
Rainer_EMC
8.6K Posts
0
December 3rd, 2010 04:00
Why Not ?
Do you have a real Powerlink account?
Rainer_EMC
8.6K Posts
0
December 3rd, 2010 04:00
yes - as long as you don't touch the reserved areas on the first five disks
I would suggest to ask in the Clariion category of the EMC support network (Powerlink auth required)
Thomasz1
25 Posts
0
December 3rd, 2010 05:00
I will, thanks for helping!
Thomasz1
25 Posts
0
December 8th, 2010 07:00
Got one more question...
Want to connect this CX-600 storage to some hosts running 2k8 R2.
Now i found the following site, which says i need flare code 26:
http://www.windowsservercatalog.com/item.aspx?idItem=32f75813-6655-abc2-8967-b82f2a963d14&bCatID=1511
I'm running flare code 11. What to do?!
Rainer_EMC
8.6K Posts
0
December 8th, 2010 07:00
For information on whats supported with EMC products I would suggest to use the official EMC Support Matrix – either through ELab Navigator on Powerlink or through emc.com and not google
PLEASE use the EMC SUPPORT forums Clariion category https://community.emc.com/community/support/clariion?view=discussions&start=0
Rainer
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
December 8th, 2010 08:00
that's really old, optimally you would want to be at least on flare 19. I assume this is a lab setup and not production. Most likely win2k8 will work just fine with flare 11.