Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
589
Upgrading VNX7500 with RP attached
I want to upgrade a VNX7500 to 05.32.000.5.209 / 7.1.74.5. There is a RecoverPoint device attached. What is the recommended code level for the Rp device?
DiegoNieva
7 Posts
0
January 16th, 2014 11:00
Hi!
What version of RP are you running? Are they virtual or physicals?
Once you have that info I can look it up in the interoperability lab
https://elabnavigator.emc.com/
Cheers.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 16th, 2014 12:00
The RP devices are physical. I am not sure what level of release we are at. How do we check? I have what is listed in CSI but I am not sure if that is accurate. It have 3.4.1.1, 3.4.2.0, and 3.5.1 listed.
DiegoNieva
7 Posts
0
January 16th, 2014 12:00
Hi!
Thanks for the reply.
Do you have access to the RP CLI? If so, the command would be:
xxxxx> get_version
Version: 3.5.SP1.P2(o.175)
xxxxx>
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 17th, 2014 07:00
Customer says they are at Version: 3.5.P2(n.161).
DiegoNieva
7 Posts
0
January 19th, 2014 11:00
According to the compatibility matrix 5.32 it is compatible and they can coexist.
Here's the link again:
https://elabnavigator.emc.com/do/navigator.jsp