Unsolved
This post is more than 5 years old
28 Posts
0
582
VIA Error
Getting an error on the net cable check. It passes for the MGMT port A\B , but fails on the MGMT Switch check.
This was a re-initialization and I followed the support article on the re-initialization and using all the correct software versions.
Any suggestions?
RRR
1 Rookie
1 Rookie
•
5.7K Posts
0
September 13th, 2012 02:00
Sometimes setting the LAN switch port fixed on 100Mbps / FD helps.
rupal1
433 Posts
0
September 13th, 2012 03:00
Is this a Unified model, if yes, please share the output for #/nasmcd/sbin/setup_enclosure -checkCable
Vipin VK
812 Posts
0
September 13th, 2012 04:00
Management switch IPs may need to be checked. Just try also # /nas/sbin/setup_enclosure -checkSystem .