Unsolved
This post is more than 5 years old
1 Message
0
3958
February 24th, 2012 14:00
VNX 5300 ISCSI 10G SFP
I have a Cisco 6509e and I want to connect with a VNX 5300 ISCSI 10G SFP X-blade? The following are the options for the Cisco 6509e:
XENPAK-10GB-CX4 10GBASE-CX4 XENPAK Module
XENPAK-10GB-ER+ 10GBASE-ER XENPAK Module with DOM Support
XENPAK-10GB-LR 10GBASE-LR XENPAK Module
XENPAK-10GB-LX4 10GBASE-LX4 XENPAK Module
XENPAK-10GB-SR 10GBASE-SR XENPAK Module
XENPAK-10GB-ZR 10GBASE-ZR XENPAK Module
XENPAK-10GB-LW 10GBASE-LW XENPAK Module
X2-10GB-SR 10GBASE-SR X2 Module
X2-10GB-LR 10GBASE-LR X2 Module
X2-10GB-ER 10GBASE-ER X2 Module
X2-10GB-LX4 10GBASE-LX4 X2 Module
X2-10GB-CX4 10GBASE-CX4 X2 Module
SFP-10G-LRM 10GBASE-LRM SFP
CVR-X2-SFP10G OneX Converter Module
Cable supported with
OneX Converter
SFP-H10GB-CU1M=Cisco 10GBASE-CU SFP+ Cable, 1 Meter (Version -02)
SFP-H10GB-CU3M=Cisco 10GBASE-CU SFP+ Cable, 3 Meter (Version -02)
SFP-H10GB-CU5M=Cisco 10GBASE-CU SFP+ Cable, 5 Meter (Version -02)
SFP-10G-SR=Cisco 10GBASE-SR SFP+ Module for MMF
kelleg
4 Operator
•
4.5K Posts
0
February 24th, 2012 14:00
The VNX uses a 10Gb SFP+ optical adpater - LC - not sure if that helps
glen
Rainer_EMC
4 Operator
•
8.6K Posts
0
February 24th, 2012 15:00
The only 10GBit Ethernet SFP that we ship and support is the one with short-range multi-mode fiber and 850nm wavelength – so in your case XENPAK-10GB-SR
Rainer
gustavoberger
2 Posts
0
March 5th, 2013 09:00
Hi Guys,
IHAC that asked me if CISCO's SFP+ is supported in X-Blades cards. Do you know if they can use and if it is supported?
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 5th, 2013 10:00
Our 10G cards come complete with SFP’s where needed so you just plugin the cables