Unsolved
27 Posts
0
945
VNX Block Power Down
I have been following the mydocument.emc.com to power down the VNX block device via Unisphere
Is there any other method than GUI to power down, that is, via the serial port or accessing RemotelyAnywhere?
Unsolved
27 Posts
0
945
I have been following the mydocument.emc.com to power down the VNX block device via Unisphere
Is there any other method than GUI to power down, that is, via the serial port or accessing RemotelyAnywhere?
Top
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
March 17th, 2021 08:00
Hello mutthu,
You can also use CLI to power down your system. Here is the link to the VNX Series Command Line Interface Reference for Block which has the commands to do the shutdown via cli. https://dell.to/3tueIkT