Unsolved
This post is more than 5 years old
15 Posts
0
2047
VNX for file
Hi All,
I am new to VNX Unified storage. I have an installed coming up and would like few things to get cleared before going ahead.
Coming to the hardware, I have VNX5200 with 2 Datamovers and one Control Station. Two-three servers would be accessing the storage using NFS and few users would be using CIFS from there desktops.
My query is whether to go for VDM or directly can I use Physcial DM for my above requirement.
Also please share all the steps. Thanks in advance.
Praveen.
Rainer_EMC
8.6K Posts
0
May 17th, 2016 04:00
Using VDM’s has some advantage if you want security isolation – i.e. one VDM’s clients not being able to see the other VDM’s data and also for replication.
EMCmember
15 Posts
0
May 17th, 2016 04:00
Hi Rainer,
Thanks for your reply.
Please could you share the steps for configuring VDM for NFS and CIFS.
Rainer_EMC
8.6K Posts
0
May 17th, 2016 05:00
Hi,
please visit support.emc.com and down load the manuals for CIFS and VDM
m_makadmeh
43 Posts
0
May 17th, 2016 05:00
Hello,
Yes, As Rainer mentioned above, Using VDM's has some advantages (ease of management, security isolation, load balancing, migration and replication ...etc).
Good to know the following considerations when using VDMs with NFS:
- VDM can support a single NFS server for a single domain namespace..
- VDM supports NFSv3 and NFSv4 over TCP (UDP not supported).
- NFS configuration can only be performed with CLI ( can NOT be done using Unisphere).
I personally prefer to use VDMs in case of CIFS and to use the physical DM network interfaces for NFS!
1) Create the LUNs from the pool/RAID Group.
2) Connect the LUNs to the ~filestorage storage group.
3) Rescan Storage Systems (wait for the task to complete).
4) Hoover over the Storage tab -> under storage configuration click on Storage Pools for File to verify the assignment (click on Volumes for more details).
5) Create the interfaces: Settings->Network->Settings For File -> Interfaces -> Create (follow the wizard).
For CIFS:
6) Create the VDM.
7) Create the CIFS Server and join it to the domain (select the VDM from the dropdown list and the network interfaces created on step 5).
8) Create the File System (select the VDM from the dropdown list).
9) Verify the Mount Point Creation.
10) Create the Share (select the VDM from the dropdown list, the CIFS sever and select the network interface you want to use).
For NFS:
6) Create the File System (select the Physical DM from the dropdown list).
7) Verify the Mount Point Creation.
8) Storage -> Shared Folders -> NFS -> Create (select the Physical DM from the dropdown list).
9) Fill the required access information.
10) you can use any IP address (network interface created on step 5) to mount the NFS (configure the security and
permissions of the NFS share , chown, chmod ...etc).
And for sure you will need to visit support.emc.com and download the manuals for more customizations.
Good Luck
Rainer_EMC
8.6K Posts
0
May 17th, 2016 05:00
If you really want to use NFS VDM’s you have to use the CLI – they are not in the GUI
Step-by-step copy and paste procedures aren’t a replacement for spending time understanding the system
EMCmember
15 Posts
0
May 17th, 2016 06:00
Thanks m.makadmeh@uaeu.ac.ae for sharing the steps.
Why would you prefere Physcial DM for NFS above VDM.
EMCmember
15 Posts
0
May 17th, 2016 06:00
Hi Rainer,
I was looking for the steps, not the commands.
Rainer_EMC
8.6K Posts
0
May 18th, 2016 01:00
Hi,
my point was that there is still value looking at the PDF Manuals since they not only show the steps and command they also each include a concepts section that explains the Feature and its use cases
Reading these concepts sections that are only a few pages long per Feature is one of the best ways to learn how the VNX file side works
EMCmember
15 Posts
0
May 18th, 2016 06:00
Hi,
Absoultely right, I agree with you. Just want to know the concept first.
Can anyone tell me please why Physcial DM network interface is better than VDM virtual network interface for NFS?
Doesn't that affect during failover or giveback?
Rainer_EMC
8.6K Posts
0
May 18th, 2016 07:00
The difference is mostly that through a VDM attached interface you can only access NFS shares on that VDM and not on others