Unsolved
This post is more than 5 years old
100 Posts
4
17943
VNX replace firt 4 disk and reimage.
Hello,
On VNX 5500 for example i think to test the follow procedure:
1.Create one pool and one raid group.
2.Create some luns on pool and raid group.
3.Write some data on these luns.
4.Power off the array.
5.Pull out first 4 disk-Vault disks.
6.Install new 4 disk(regular disk from normal DAE, NOT from OS DAE).
7.Start VNX_boot_image_recovery procedure.
8.Check that all data is on place(the old luns with data on them).
My questions are:
Will the utility partition boot from normal disk?
Where is locate utility partition- on BIOS code or on firt part on vault disks?
Do i need 2 vault disk to boot utility partition?
All this tasks will be done on training VNX in our lab.
mika3444
1 Message
0
May 1st, 2019 02:00
I do not understand why in the technical forum, when solving technical questions, to give answers about the service contract and the service center? we discuss the procedure how to recover.
i have a case to repair VNXe 3100.
Where is Disk 3?
We have no user data and can do anything (not to buy new disk). Can i remove faulty drive Disk 3, take any disk at the end of disk line and try to reimage?
I tryed to make a reimage, but admin password not Password123#, i can not log in as admin.
service password is Ok, i can logon as service.
If i have a service password, can i reset password for admin user by a easy way without reimage?
How to diagnose a SN of faulty drive?
I dont know how to find a "Disk 3", because i dont know how we need to start a count - from "Disk 0" zero or from "Disk 1". Does anybody have a picture with disk locations of "12-Disk-DAE'?
I connected my PC (as usual) to the COM port (to each SP), and COM-USB adapter works good, i can logon as service and type a commands.
all disks have a blue lamp, but i see a error message (at COM port, at power on)
(...) - some usual lines
Press to enter setup.
(...) - some usual lines
This product includes software developed by Viola Systems
(http://www.violasystems.com/).
ABCDabcEFabcdGabcdefHabcdefIabcdefJabcdKLabMabcdNabOabPabcdQabcdRabcSTUVWXYZAAabBBCCDDEEFFGGabHHIIJJKKLLMMNNOOPPQQRR
Relocating Data Directory Boot Service (DDBS: Rev. 05.04)...
Autoflash ISC?
DDBS: Read default MDDE off disk 1
DDBS: MDDE (Rev 600) on disk 1
DDBS: Read default DDE (0x40000F) off disk 1
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001000
Buffer: 0x1000DFB4
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001400
Buffer: 0x1000E1BC
DDBS: Read default MDDE off disk 3
DDBS: MDDE (Rev 600) on disk 3
DDBS: Read default DDE (0x400010) off disk 3
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x05C1A001
Buffer: 0x1000DDAC
DDBS: MDB Invalid on first disk (checksum).
DDBS: Can't read MDB from second disk.
DDBS: Using first disk by default.
ISC image located at sector LBA 0x05C1A002
DDBS: Read default MDDE off disk 1
DDBS: MDDE (Rev 600) on disk 1
DDBS: Read default DDE (0x40000F) off disk 1
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001000
Buffer: 0x1000DFB4
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001400
Buffer: 0x1000E1BC
DDBS: Read default MDDE off disk 3
DDBS: MDDE (Rev 600) on disk 3
DDBS: Read default DDE (0x400010) off disk 3
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x05C1A001
Buffer: 0x1000DDAC
DDBS: MDB Invalid on first disk (checksum).
DDBS: Can't read MDB from second disk.
DDBS: Using first disk by default.
ISC image located at sector LBA 0x05C1A002
DDBS: Read default MDDE off disk 1
DDBS: MDDE (Rev 600) on disk 1
DDBS: Read default DDE (0x40000F) off disk 1
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001000
Buffer: 0x1000DFB4
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x00001400
Buffer: 0x1000E1BC
DDBS: Read default MDDE off disk 3
DDBS: MDDE (Rev 600) on disk 3
DDBS: Read default DDE (0x400010) off disk 3
Disk 3 Read Error 0x0000010B
Number Sectors: 1
LBA: 0x05C1A001
Buffer: 0x1000DDAC
DDBS: MDB Invalid on first disk (checksum).
DDBS: Can't read MDB from second disk.
DDBS: Using first disk by default.
ISC image located at sector LBA 0x05C1A002
Loading /initramfs.gz... ok
DDBS: MDDE (Rev 600) on disk 0
FIRMWARE BUNDLE image located at sector LBA 0x0002DE00
Attempting to Boot USB Extended Post...
Autoflash POST?
DDBS: MDDE (Rev 600) on disk 0
EXTLINUX 3.82 3.82 EBIOS Copyright (C) 1994-2009 H. Peter Anvin et al
Copyright (c) EMC Corporation, 2011
COM32 Module - 8179 MB found
DDBS: MDDE (Rev 600) on disk 0
EVERGREEN_8G boot will proceed in 1 second(s). Press to edit boot string.
Loading /vmlinuz... ok
Loading /initramfs.gz...