VNX
Posts
Unsolved
This post is more than 5 years old
11 Posts
0
820
September 2nd, 2016 01:00
VNX5300 Block Backup
It is possible to backup (a raid-group/pool) from a single VNX5300 via EMC Networker?
Thanks Dirk
Responses(4)
No Events found!
Unsolved
This post is more than 5 years old
11 Posts
0
820
It is possible to backup (a raid-group/pool) from a single VNX5300 via EMC Networker?
Thanks Dirk
Top
Rainer_EMC
8.6K Posts
0
September 5th, 2016 02:00
Networker typically doesnt backup block storage directly – you need to backup the file systems using it
kelleg
4.5K Posts
0
September 8th, 2016 08:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
DMBrosig
11 Posts
0
September 9th, 2016 03:00
There has to be a way to backup block storage directly and not a single VM.
Dirk
Rainer_EMC
8.6K Posts
0
September 9th, 2016 11:00
see the Backup and Recovery in a SAN TechBook
you also might want to ask in the Networker forum