What is default user and pass for first log on VNX

Question

Hello,

My VNX 5300 Block/File Unified system is up and running.

I've done this by "VNX Installation Assistent for File/Unified" after that i registered my system.

But now i can't log on it..

I've tried all users trought instalation process "nasadmin,root," with their passwords.

When i set ip on primary CS0 i can log on it, but how to log on SPA,SPB and how to manage storage?

On a Unified system SP's are accessed trought primary CS IP.

When i type IPs on SPs on unisphere i can't log on with.

Is there any default log in?

TomLambrechts · Answer

maybe: user: nasadmin pw: nasadmin

TomLambrechts · Answer

Powerlink:

ID:	emc257320
Usage:	11
Date Created:	12/06/2010
Last Modified:	01/05/2011
STATUS:	Approved
Audience:	Customer

Knowledgebase Solution

Environment:	EMC SW: NAS Code 6.0
Problem:	After NAS 6.0 fresh installation, unable to log in to Unisphere
Problem:	After a fresh installation on a Control Station with the wrong time, off-array will present the user with a message that the certificate has an invalid date. The user is not given an option to accept the certificate so they cannot proceed. Using on-array in the same scenario, the browser will let you accept the certificate, but Unisphere still rejects it and will not give the user an opportunity to accept it. It will hang with a blue screen as if you had not accepted the certificate.
Root Cause:	The root certificate had an invalid date, but the leaf certificate had the valid date. This is an issue that is related to the generation of certificates on the Control Station, and the point at which they become valid/active. It's only seen if the time on the Control Station is set to some time in the future, and the delta from actual time is longer than it would take to complete an installation and actually attempt to log in for the first time. This issue can be completely avoided by ensuring that the time on the Control Station is correct.
Fix:	Workaround: Set the date of the Windows client to a few days forward. For example, if it is December 1 currently, set the date to December 3, then try to log in to Unisphere. If the workaround succeeds, wait for a few days before trying to log in to Unisphere.
Notes:	The /nas/sbin/nas_config -ssl command did not fix the problem.
Notes:	AR#377739, 371218, SR#37850928

angel_isakov · Answer

Tried all nasadmin,root,sysadmin -can't log on...

angel_isakov · Answer

And when i can found this docs 'emc257320'?

angel_isakov · Answer

It's works Thank you.But how to set to manage all SPA,SPB,Celerra in one window?Now i can log on then but seperately.

Rainer_EMC · Answer

How about using sysadmin ?

dynamox · Answer

for root/nasadmin , password should be 'nasadmin', for sysadmin password should be 'sysadmin'

yassine_mounir · Answer

Hi all,

i'm a new with EMC and i'm looking for root, sysadmin & nasadmin password.

i'm installing a new vnx 5300 and i can't continu the installation because I don' know the default password for root sysadmin nasadmin.

thanks for your help.

RolandUK · Answer

If you use the nasadmin/nasadmin for control station access (ssh or VIA) and sysadmin/sysadmin (use local not global) for Unisphere (connecting to CS0 IP not (SPa or SPB) you should get in.

single29 · Answer

Key in following in your browser 10.140.52.3/setup sysadmin/sysadmin worked for me for vnx5300. You can restart management server if one of SP didn't work or reboot didn't fix the problem

VNX

What is default user and pass for first log on VNX

Was this post helpful?