Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
6022
identifying Hitachi WWID (HDS Lun UID)
Does anyone know how to identify Hitachi WWID for its Luns thru either Storage Navigator or CLI? I need this information for sancopy migration to VNX.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
August 20th, 2013 09:00
Probably get more responses in Hitach user community ?
http://community.hds.com/community/products-and-solutions/hardware
LeeGoodwin
19 Posts
1
August 20th, 2013 11:00
Depends on the type of unit
But HDS do not map LU/volumes as EMC do,
EACH physical FC port can be virtulised and so you can work out the volume from the WWID and which CTL it comes from follow below.
5 0 0 6 0 E 8 0 1 0 4 2 7 4 7 0
In black this is fixed 00:60:E8 is the Hitachi/Hitachi Data Systems, WWID nomination
Red is machine type
Blue is the serial number in HEX
last digit is the port so 0 is port 0a and so depends on number of ports
watch out for type 2 AMS 2100 and 2300 and ports are reserved
if you upgrade from a two port fc to a 4 port per CTL
so if you see a volume with above WWID you can say it is an AMS 200 with SN 73010055 on port 0a
730 AMS 200
750 AMS 500
770 AMS 1000
830 AMS 2100
850 AMS 2300
870 AMS 2500
I hope this helps
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 20th, 2013 12:00
It does help! Thanks Lee!
kelleg
4.5K Posts
0
September 20th, 2013 14:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen