Unsolved
This post is more than 5 years old
5 Posts
0
4127
passive twinax cables for VNX 5300 10Gb iSCSI module
does anyone know if there is support for passive twinax now for 10Gb iSCSI I/O modules? I need to connect a VNX 5300 to Cisco UCS 6248 fabric interconnects but the cisco bundle only comes with passive cables.
Rainer_EMC
8.6K Posts
0
June 26th, 2012 23:00
No that hasn't changed
Probably won't since 10GbaseT copper cards will be released soon
Rainer
rupal1
433 Posts
0
June 27th, 2012 01:00
TwinAx Passive cables are yet not supported on the VNX models . Its only the active ones.
Have a broader look : http://www.emc.com/collateral/hardware/white-papers/h8217-introduction-vnx-wp.pdf
Thanks
Rupal
ayas
Moderator
Moderator
•
6.7K Posts
0
May 26th, 2015 16:00
Hi
Anybody knows about vnxe3200 supports passive or not?
Should I go another space?
Thanks !
ayas
Moderator
Moderator
•
6.7K Posts
0
May 26th, 2015 19:00
found this thread ... Looks like VNXe does not support TwinAX anyway ( its need RPQ for it )
Re: twinax cables on VNXe
Thanks !